IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-675001.png)
Fuel Pressure Sensor: Testing and Inspection
INSPECTION
1. INSPECT FUEL PRESSURE SENSOR
a. Check the fuel pressure sensor output voltage.
1. Apply 5 V between terminals 3 (VC) and 1 (E2).
2. Measure the voltage between terminals 2 (PR) and 1 (E2).
Standard voltage: Approximately 0.5 V
HINT: The voltage is output when pressure is not applied (0 kPa (0 kgf.sq.cm)) to the sensor.
