IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Transmission Position Switch/Sensor: Adjustments
PARK / NEUTRAL POSITION SWITCH
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
a) Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.
b) Align the groove and the neutral alignment mark line.
c) Hold the switch in position and tighten the bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
d) After adjustment, perform the inspection.