IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Cruise Control Module: Service and Repair
Distance Control ECU
DISTANCE CONTROL ECU
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
3. REMOVE DISTANCE CONTROL ECU
a. Disconnect the connector.
b. Remove the nut and the distance control ECU.
INSTALLATION