IS 250 RWD V6-2.5L (4GR-FSE) (2007)
d. Install the SST.
1. Connect the SST connector to the driver side knee airbag assembly.
SST 09082-00770
e. Place the tires.
1. Place at least 2 tires under the tire which the driver side knee airbag assembly is tied to.
2. Place at least 2 tires over the tire which the driver side knee airbag assembly is tied to. The top tire should have the disc wheel installed.
NOTE: Do not place the SST connector under the tire because it could be damaged.
3. Tie the tires together with 2 wire harnesses.
CAUTION: Make sure that the wire harness is tight. Looseness in the wire harness results in the tires coming free due to the
shock when the airbag is deployed.