lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Procedures|Page 8916 > < Procedures|Page 8914
Page 32
background image

shock when the airbag is deployed.

-

Always tie down the steering pad with the airbag deployment side facing upward.

NOTE:  The disc wheel will be damaged by the airbag deployment, so use an extra disc wheel.

d. Install the SST.

CAUTION:  Place the disc wheel on level ground.

1. Connect the SST connector.

SST 09082-00700

NOTE:  To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack
for the SST wire harness inside the disc wheel.

2. Move the SST at least 10 m (33 ft) away from the airbag tied down to the disc wheel.

e. Cover the steering pad (Using a cardboard box).

1. Cover the steering pad with the cardboard box.
2. Place weights on the cardboard box in 4 places totalling at least 190 N (19 kg, 43 lb).

Cardboard box size:

Must exceed the following dimensions
X: 460 mm (18.11 in.)
Y: 650 mm (25.59 in.)

NOTE:
-

When the dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire which the steering pad is tied to, X should
be the following size.
X = 460 mm (18.11 in.) + width of tire

Procedures|Page 8916 > < Procedures|Page 8914