IS 250 RWD V6-2.5L (4GR-FSE) (2007)
b. With the front passenger side knee airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned,
replace the front passenger side knee airbag assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the front passenger side knee airbag assembly.
-
Cracks or other damage to the connector.
-
Deformation or cracks on the instrument panel reinforcement.
CAUTION: Be sure to follow the correct removal and installation procedures.
Front Seat Side Airbag Assembly
ON-VEHICLE INSPECTION
1. FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the front seat airbag assembly installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the
front seat assembly with a new one:
Cuts, minute cracks or marked discoloration on the front seatback assembly around the front seat airbag assembly.
2. FRONT SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.