IS 250 RWD V6-2.5L (4GR-FSE) (2007)
b. With the steering pad removed from the vehicle, perform a visual check. If there are any defects as mentioned, replace the steering pad or
steering wheel assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the steering pad top surface or in the grooved portion.
-
Cracks or other damage to the connectors.
-
Deformation of the steering wheel assembly.
-
Deformation of the horn button contact plate of the steering pad.
-
There should be no interference between the steering pad and steering wheel assembly, and the clearance should be uniform all the way
around when the new steering pad is installed on the steering wheel assembly.
CAUTION: Be sure to follow the correct removal and installation procedures.