IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a. Using a screwdriver, disengage the 3 claws and remove the vertical adjuster RH cover.
HINT: Tape the screwdriver tip before use.
11. REMOVE VERTICAL ADJUSTING HANDLE RH
a. Remove the 2 screws and the vertical adjusting handle RH.
12. REMOVE VERTICAL SEAT ADJUSTER KNOB RH
a. Remove the snap ring and the vertical seat adjuster knob RH.
13. REMOVE FRONT SEAT CUSHION SHIELD RH
a. Remove the screw.
b. Disengage the 2 claws and clip to remove the front seat cushion shield RH.