IS 250 RWD V6-2.5L (4GR-FSE) (2007)
c. Engage the clamp to install the occupant detection sensor connector.
3. INSTALL FRONT SEAT INNER CUSHION SHIELD RH
a. Engage the 2 claws and clip to install the front seat inner cushion shield RH.
b. Install the screw.
4. INSTALL FRONT SEAT CUSHION SHIELD RH
a. Engage the 2 claws and clip to install the front seat cushion shield RH.
b. Install the screw.
5. INSTALL VERTICAL SEAT ADJUSTER KNOB RH
a. Install the vertical seat adjuster knob RH with the snap ring.