IS 250 RWD V6-2.5L (4GR-FSE) (2007)
16. INSTALL NO.1 ULTRASONIC SENSOR
a. Install the No.1 ultrasonic sensor to the front bumper.
b. Install the sensor retainer as shown in the illustration.
c. Connect the sensor connector.
17. INSTALL FRONT BUMPER ASSEMBLY
18. INSTALL COOL AIR INTAKE DUCT SEAL
19. VEHICLE PREPARATION FOR FOG LIGHT AIM
20. PREPARATION FOR FOG LIGHT AIMING
21. FOG LIGHT AIMING INSPECTION
22. FOG LIGHT AIMING ADJUSTMENT