IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-283002.png)
b. Using SST, remove the sensor from the exhaust manifold RH.
SST 09224-00010
18. REMOVE AIR FUEL RATIO SENSOR (BANK 2 SENSOR 1)
a. Using SST, remove the sensor from the exhaust manifold LH.
SST 09224-00010
INSTALLATION
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
a. Using SST, install the sensor to the exhaust manifold LH.
SST 09224-00010
Torque:40 N.m (408 kgf.cm, 30 ft.lbf)
b. Connect the sensor connector.
2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
