IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-327003.png)
3. INSTALL REAR DOOR SCUFF PLATE
4. INSTALL REAR SEATBACK ASSEMBLY
5. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
6. INSTALL REAR SEAT HEADREST ASSEMBLY
7. INSTALL REAR SEAT CUSHION ASSEMBLY
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
a. Perform initialization.
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
10. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.
