IS 250 RWD V6-2.5L (4GR-FSE) (2007)
6. INSTALL VERTICAL ADJUSTING HANDLE RH
a. Install the vertical adjusting handle RH with the 2 screws.
7. INSTALL VERTICAL ADJUSTER RH COVER
a. Engage the 3 claws to install the vertical adjuster cover RH.
8. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH
a. Engage the claw to install the reclining adjuster release handle RH.
9. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH
a. Install the 3 clamps.
b. Connect the connector.