IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a. Using SST and a press, press in the generator coil assembly to the drive end frame.
SST09612-70100 (09612-07240)
b. Install the generator coil assembly with the 4 bolts.
Torque: 5.8 N.m (59 kgf.cm, 51 in.lbf)
4. INSTALL GENERATOR BRUSH HOLDER ASSEMBLY
a. While pushing the 2 brushes into the generator brush holder assembly, insert a Dia 1.0 mm (0.039 in.) pin into the brush holder hole.
b. Install the generator brush holder assembly to the generator coil with the 2 screws.
Torque: 1.8 N.m (18 kgf.cm, 16 in.lbf)
c. Pull out the pin from the generator brush holder.