lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

All Technical Service Bulletins for Wiring Harness:|CRIB156 > < Restraints - SRS Lamp ON/DTC B1861 Set|Page 7384
Page 3
background image

Airbag Squib Circuit" (Reference DTC B1861: Open in Driver Side Knee Airbag Squib Circuit)

B.

If DTC B1861 is no longer present, replace the Instrument Panel Wire Harness.

Instrument Panel Wire harness Part Number Identification Method

1.

The part number to order the correct part is located on the harness near the connector for the right knee airbag assembly. To access the part tag,
remove right side knee airbag assembly. Refer to Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006/2007/2008 IS 250/350:Vehicle Interior  Supplemental Restraint System  "Supplemental Restraint System: Front Passenger Side Knee
Airbag Assembly: Removal"

Instrument Panel Header Wire Harness Replacement

1.

Remove Rear Console Box.

To remove the Rear Console Box refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006/2007/2008 IS 250/350:Vehicle Interior  Interior Panels/Trim  "Rear Console Box: Removal"

2.

Remove Instrument Panel Safety Pad.

To remove the Instrument Panel Safety Pad refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006/2007/2008 IS 250/350:Vehicle Interior  Interior Panels/Trim "Instrument Panel Safety Pad: Removal"

3.

Replace Instrument Panel Wire Harness.

Unplug the harness from each connector on the vehicle. Make note of harness routing.

4.

Install the new Instrument Panel Wire Harness.

Route and plug in the new harness ensuring the connectors are fully installed into the mating connector.

5.

Reinstall the Instrument Panel Safety Pad.

To reinstall the Instrument Panel Safety Pad refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006/2007/2008 IS 250/350: Vehicle Interior  Interior Panels/Trim  "Rear Console Box: Installation"

6.

Reinstall the Rear Console Box.

To reinstall the Rear Console Box refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

^

2006/2007/2008 IS 250/350: Vehicle Interior  Interior Panels/Trim  "Rear Console Box: Installation"

All Technical Service Bulletins for Wiring Harness:|CRIB156 > < Restraints - SRS Lamp ON/DTC B1861 Set|Page 7384