IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Ride Height Sensor: Testing and Inspection
INSPECTION
1. INSPECT FRONT HEIGHT CONTROL SENSOR SUBASSEMBLY
a. Connect the 3 dry cell batteries (1.5 V) in series.
b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead from the battery to terminal 3.
c. Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.
If the result is not as specified, replace the sensor.
d. Remove the height control sensor.
2. INSPECT REAR HEIGHT CONTROL SENSOR SUBASSEMBLY