IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Ride Height Sensor: Service and Repair
REMOVAL
1. REMOVE FRONT HEIGHT CONTROL SENSOR SUBASSEMBLY (for 2WD)
a. Disconnect the connector.
b. Remove the nut.
c. Remove the 2 bolts and front height control sensor sub-assembly.
2. REMOVE FRONT HEIGHT CONTROL SENSOR SUBASSEMBLY (for 4WD)
a. Disconnect the connector.
b. Remove the bolt.
c. Remove the 2 bolts and front height control sensor sub-assembly.