IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1473002.png)
NOTICE:
^
Initialization is usually completed in 2 or 3 minutes.
^
When the initialization is completed incorrectly, DTC C2177/77 is memorized after driving the vehicle about 20 minutes or more.
^
The initialization can be terminated by making a short circuit between terminals TC and CG of the DLC3 connector.
d) Confirm that initialization is completed using the intelligent tester.
1) Check that the pressure of each tire is displayed in INIT THRESHOLD 1 to 4.
e) Initialization is completed.
