IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Using a chisel and hammer, stake the axle hub nut.
10. CONNECT FRONT SPEED SENSOR (for 2WD)
a) Connect the speed sensor connector to the seed sensor front.
NOTICE: Do not twist the sensor wire.
11. INSTALL FRONT SPEED SENSOR (for 4WD)
a) Install the speed sensor to the steering knuckle with the 2 bolts.
Torque: Bolt (A) 14 Nm (140 kgf-cm, 10 ft. .)
Bolt (B) 8.5 Nm (87 kgf-cm, 75 inch .)
NOTICE:
^
Prevent foreign matter from adhering to the speed sensor.
^
Be careful not to damage the speed sensor.
^
Do not twist the sensor wire when installing the speed sensor.
12. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. .)
13. CHECK ABS SPEED SENSOR SIGNAL