IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1488012.png)
30. FULLY TIGHTEN NO.2 REAR SUSPENSION ARM ASSEMBLY
a) Fully tighten the No.2 rear suspension arm assembly with the bolt and nut.
Torque: 161 Nm (1,642 kgf-cm, 119 ft. lbs.)
NOTICE: Turn the bolt while holding the nut.
31. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
32. INSPECT PARKING BRAKE PEDAL TRAVEL
33. ADJUST PARKING BRAKE PEDAL TRAVEL
34. INSPECT PARKING BRAKE LEVER TRAVEL
35. ADJUST PARKING BRAKE LEVER TRAVEL
36. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
37. CHECK ABS SPEED SENSOR SIGNAL
