IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Disconnect the transmission revolution sensor connector.
b) Remove the bolt and transmission revolution sensor.
c) Remove the O-ring from the transmission revolution sensor.
INSPECTION
1. INSPECT TRANSMISSION REVOLUTION SENSOR (NT)
Sensor Side (Connector Front View)
a) Measure the resistance according to the value(s) in the table.
Standard Resistance
If the resistance value is not as specified, replace the speed sensor.
2. INSPECT TRANSMISSION REVOLUTION SENSOR (SP2)
Sensor Side (Connector Front View)