IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Shifter A/T: Adjustments
SHIFT LEVER ASSEMBLY
ADJUSTMENT
1. ADJUST SHIFT LEVER POSITION
a) Remove the nut and disconnect the shifting rod.
b) Turn the control shaft lever of the park/neutral position switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N
position.
c) Move the shift lever to the N position and tighten the nut while lightly pushing the lever toward the R position.
NOTICE: Do not push the shift lever too hard.
d) After adjustment, check that the shift lever moves smoothly and the shift lever and gear operate correctly