IS 250 RWD V6-2.5L (4GR-FSE) (2007)
b) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c) Connect the transmission wire connector.
2. CONNECT TRANSMISSION WIRE
a) Connect the 9 connectors to the solenoid valves.
b) Install the ATF temperature sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
c) Install the 2 clamps with the 2 bolts.
Torque: Bolt A 6.4 Nm (65 kgf-cm, 57 inch lbs.)
Bolt B 10 Nm (102 kgf-cm, 7 ft. lbs.)
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY