IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1069003.png)
a) Remove the 2 nuts, bolt and clutch pedal support.
14. REMOVE CLUTCH START SWITCH ASSEMBLY
a) Remove the nut and clutch start switch assembly from the clutch pedal support.
15. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS PIN
a) Remove the clip and pin.
16. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY
a) Remove the clutch reservoir tube.
b) Remove the 2 bolts and clutch master cylinder assembly.
INSTALLATION
1. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
