IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Using SST, connect the clutch line.
SST 09023-00101
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)
HINT: Use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
4. FULLY TIGHTEN CLUTCH RELEASE CYLINDER ASSEMBLY
a) Fully tighten the clutch release cylinder with the 2 bolts.
Torque: 12 Nm (120 kgf-cm, 9 ft. lbs.)
5. FULLY TIGHTEN CLUTCH ACCUMULATOR ASSEMBLY
a) Fully tighten the clutch accumulator with the 3 bolts.
Torque: 12 Nm (120 kgf-cm, 9 ft. lbs.)
6. BLEED CLUTCH LINE
a) Fill the brake reservoir with the brake fluid and bleed the clutch system.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
7. CHECK FOR BRAKE FLUID LEAKAGE
a) Check for leakage in the clutch system.
8. INSPECT BRAKE FLUID LEVEL IN RESERVOIR