IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Using SST, disconnect the clutch line from the clutch master cylinder.
SST 09023-00101
HINT: Use a container to catch the fluid.
13. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
a) Remove the 2 nuts, bolt and clutch pedal support.
14. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS PIN
a) Remove the clip and pin.
15. REMOVE PEDAL WITH HOOK SPRING
a) While the clutch pedal is fully depressed, remove the hook spring.
16. REMOVE CLUTCH PEDAL SUB-ASSEMBLY