IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1071006.png)
a) Remove the 3 clutch pedal cushions.
21. REMOVE CLUTCH PEDAL PAD
a) Remove the clutch pedal pad from the clutch pedal.
22. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSHING
a) Using a 8 mm hexagon wrench and a hammer, remove the clevis bushing from the clutch pedal.
INSTALLATION
1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSHING
a) Apply MP grease to the inside of a new clevis bushing.
b) Install the clevis bushing to the clutch pedal.
HINT: Install the clevis bushing from the left side of the vehicle.
