IS 250 RWD V6-2.5L (4GR-FSE) (2007)
2. INSTALL CLUTCH PEDAL PAD
a) Install the clutch pedal pad to the clutch pedal.
3. INSTALL CLUTCH PEDAL CUSHION
a) Using needle-nose pliers, install the 3 clutch pedal cushions to the clutch pedal.
4. INSTALL CLUTCH PEDAL SHAFT COLLAR
a) Apply MP grease to the inner, outer and end surfaces of 2 new pedal bushings.
b) Install the clutch pedal shaft collar and 2 pedal bushings to the clutch pedal.
5. INSTALL CLUTCH PEDAL TURNOVER BUSHING
a) Apply MP grease to the inside of the turnover bushing.
b) Install the turnover bushing to the clutch pedal.