IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Remove the clutch release fork sub-assembly from the transmission unit.
b) Remove the E-ring, pin and wave washer from the clutch release fork.
3. REMOVE CLUTCH DISC ASSEMBLY
NOTICE: Keep the lining part of the clutch disc assembly, the pressure plate and surface of the flywheel sub assembly away from oil and foreign
matter.
4. REMOVE CLUTCH COVER ASSEMBLY
5. REMOVE CLUTCH RELEASE BEARING SHAFT SNAP RING
a) Using a snap ring expander, remove the clutch release bearing shaft snap ring.
b) Remove the clutch release bearing hub, release bearing wave washer and release bearing plate washer.
6. REMOVE CLUTCH RELEASE HUB SNAP RING