IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1084007.png)
a) Install the brake caliper assembly and new No.1 caliper plates to the steering knuckle with the 2 bolts. (for 4GR-FSE).
Torque: 78 Nm (795 kgf-cm, 58 ft. lbs.)
NOTICE:
^
Do not twist the front brake hose when installing the front disc brake caliper.
^
Make sure that there are no foreign objects or damage to the threads of the bolts.
^
Do not overtighten the bolts because the steering knuckle is made of aluminum and may be damaged easily.
b) Install the brake caliper assembly to the steering knuckle with the 2 bolts. (for 2GR-FSE)
Torque: 78 Nm (795 kgf-cm, 58 ft. lbs.)
NOTICE:
^
Do not twist the front brake hose when installing the front disc brake caliper.
^
Make sure that there are no foreign objects or damage to the threads of the bolts.
^
Do not overtighten the bolts because the steering knuckle is made of aluminum and may be damaged easily.
8. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY (for 4WD)
a) Install the brake caliper assembly and new No.1 caliper plates to the steering knuckle with the 2 bolts.
Torque: 78 Nm (795 kgf-cm, 58 ft. .)
NOTICE:
^
Do not twist the front brake hose when installing the front disc brake caliper.
^
Make sure that there are no foreign objects or damage to the threads of the bolts.
^
Do not overtighten the bolts because the steering knuckle is made of aluminum and may be damaged easily.
9. INSTALL FRONT AXLE HUB NUT (for 4WD)
