IS 250 RWD V6-2.5L (4GR-FSE) (2007)
a) Disengage the 4 claws, and remove the switch base from the lower instrument panel finish panel.
6. REMOVE NO.1 PATTERN SELECT SWITCH ASSEMBLY
a) Disengage the 2 claws, and remove the pattern select switch from the switch base.
INSPECTION
1. INSPECT PATTERN SELECT SWITCH
Switch Side (Connector Front View)
a) Measure the resistance according to the value(s) in the table.
Standard Resistance
If the resistance value is not as specified, replace the pattern select switch.