IS 250 RWD V6-2.5L (4GR-FSE) (2007)
INSTALLATION
1. INSTALL NO.1 PATTERN SELECT SWITCH ASSEMBLY
a) Engage the 2 claws and install the pattern select switch to the switch base.
2. INSTALL SWITCH BASE
a) Engage the 4 claws and install the switch base to the lower instrument panel finish panel.
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
4. INSTALL SIDE INSTRUMENT PANEL LH
5. INSTALL FRONT DOOR OPENING TRIM COVER LH
6. INSTALL FRONT DOOR SCUFF PLATE LH