IS 250 RWD V6-2.5L (4GR-FSE) (2007)
b. Install the windshield outside moulding, as shown in the illustration.
4. INSTALL WINDSHIELD GLASS ADHESIVE DAM
a. Coat the installation part of the dam with Primer G.
NOTICE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much primer.
b. Install a new dam, applying double-sided tape all the way around the glass except where the dam is installed, as shown in the illustration.
5. INSTALL WINDSHIELD GLASS
a. Clean and shape the contact surface of the vehicle body.