IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-2177005.png)
c. Disengage the rubber pin of the windshield wiper motor from the vehicle body as shown in the illustration. Remove the windshield wiper
motor and link assembly.
13. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
a. Using a screwdriver, separate the windshield wiper No.2 link rod from the crank arm pivot of the front wiper motor assembly as shown in the
illustration.
HINT: Tape the screwdriver tip before use.
b. Using a screwdriver, separate the windshield wiper No.1 link rod from the pivot of the front wiper link assembly as shown in the illustration.
HINT: Tape the screwdriver tip before use.
