IS 250C V6-2.5L (4GR-FSE) (2011)
Antenna Cable: Service and Repair
Removal
AUDIO / VIDEO: RADIO ANTENNA CORD: REMOVAL
1. OPEN METAL TOP ROOF See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Roof
Headlining (for Front Side)/Removal
2. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT
Refer to the procedure up to Remove Instrument Panel Safety Pad Assembly See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal.
3. REMOVE ANTENNA CORD SUB-ASSEMBLY
(a) Disengage the clamp and remove the antenna cord sub-assembly.
4. REMOVE ROOF HEADLINING ASSEMBLY
HINT
Refer to the procedure up to Remove Roof Headlining Assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal and Replacement/Roof Headlining (for Front Side)/Removal.
5. REMOVE SATELLITE RADIO ANTENNA ASSEMBLY
(a) Disconnect the connector.
(b) Remove the antenna nut.
(c) Disengage the 2 claws and remove the satellite radio antenna assembly.
6. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY
(a) w/o Manual (SOS) Switch:
(1) Disconnect the 2 connectors.