IS 250C V6-2.5L (4GR-FSE) (2011)
(i) Temporarily reinstall the clock assembly to make the removal of the multi-display assembly easier.
NOTICE:
Do not install the clock assembly completely because it will be removed later.
(j) Turn the engine switch off.
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
3. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
6. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
7. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Removal
8. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
9. REMOVE INSTRUMENT PANEL COIN BOX (w/o Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
10. REMOVE FRONT ASH RECEPTACLE BOX SUB-ASSEMBLY (w/ Ashtray) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
11. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
13. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY See: Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
14. REMOVE NO. 1 RADIO BRACKET See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal
15. REMOVE NO. 2 RADIO BRACKET See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal
16. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY
(a) Slide the display and navigation module display assembly in the direction shown by the arrow to remove it.
17. REMOVE NAVIGATION ECU
(a) Disconnect each connector.