IS 250C V6-2.5L (4GR-FSE) (2011)
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
(c) Connect the sensor connector.
(d) Engage the wire harness clamp.
HINT
The illustration is for the LH side. The RH side is the opposite of the LH side.
3. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (for Back Sensor)
(a) Engage the 4 claws and install the No. 3 ultrasonic sensor retainer to the rear bumper assembly.
Text in Illustration
HINT
When installing the retainer, align the keyhole and slit as shown in the illustration.
4. INSTALL NO. 2 ULTRASONIC SENSOR (for Back Sensor)
(a) Engage the claw and install the ultrasonic sensor clip.