IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Using a screwdriver, disengage the 4 claws and guide, and remove the front door power window regulator base plate.
(b) Using needle nose pliers, remove the drum and wire guide from the power window regulator motor assembly.
NOTICE:
Do not use a screwdriver to remove them. Using a screwdriver may damage the regulator wire.
24. REMOVE FRONT DOOR NO. 2 STIFFENER CUSHION
(a) Remove the 2 bolts.
(b) Disengage the 2 guides and remove the double-sided tape and front door No. 2 stiffener cushion.
Text in Illustration
25. REMOVE FRONT DOOR FRONT LOWER FRAME SUB-ASSEMBLY
(a) Remove the bolt, nut and front door front lower frame sub-assembly with the front door glass run.
(b) Disengage the guide and remove the front door glass run from the front door front lower frame sub-assembly.
26. REMOVE FRONT DOOR FRONT LOWER FRAME UPPER COVER
27. REMOVE FRONT DOOR DIVISION BAR SEAL
(a) Using a clip remover, disengage the 2 clips.