IS 250C V6-2.5L (4GR-FSE) (2011)
(b) Engage the 3 claws and install the hood lock control lever sub-assembly.
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Installation
5. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Installation
6. INSTALL DOOR SCUFF PLATE ASSEMBLY LH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Installation
7. INSTALL HOOD LOCK ASSEMBLY
(a) Apply MP grease to the sliding areas of the hood lock assembly.
(b) Connect the hood lock control cable assembly and connector.
(c) Install the hood lock assembly with the 2 bolts and hood lock nut.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
8. INSTALL HOOD LOCK NUT CAP
(a) Install a new hood lock nut cap.