IS 250C V6-2.5L (4GR-FSE) (2011)
Hub/Removal
29. SEPARATE TOE CONTROL LINK SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
30. REMOVE REAR NO. 2 UPPER CONTROL ARM ASSEMBLY (for LH Side) See: Steering and Suspension/Suspension/Control Arm/Service
and Repair/Rear Upper Arm/Removal
31. REMOVE REAR NO. 2 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
32. SEPARATE REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for LH Side) See: Maintenance/Wheels and Tires/Wheel Hub/Service and
Repair/Rear Axle Hub/Removal
33. SEPARATE REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
34. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Rear
Axle Hub/Removal
35. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
36. REMOVE REAR AXLE ASSEMBLY LH See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Rear Axle Hub/Removal
37. REMOVE REAR AXLE ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
38. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY LH
(a) Remove the bolt and nut (B), and separate the rear stabilizer link assembly LH and height control sensor link bracket.
Text in Illustration
HINT
There is only the height control sensor link bracket on vehicles with the HID headlight system.
(b) Remove the bolt (A) and nut, and separate the rear shock absorber with coil spring LH.
NOTICE:
Turn the bolt while holding the nut.
(c) Remove the bolt, washer, nut (C) and rear No. 2 suspension arm assembly LH.
39. REMOVE REAR NO. 2 SUSPENSION ARM ASSEMBLY RH
(a) Remove the bolt and nut (B), and separate the rear stabilizer link assembly RH.