IS 250C V6-2.5L (4GR-FSE) (2011)
HINT
Perform the same procedure as the LH side.
57. REMOVE REAR SUSPENSION MEMBER REAR BODY MOUNTING CUSHION (for LH Side)
(a) Using a chisel and hammer, bend the 2 portions of the rear suspension member rear body mounting cushion rib.
Text in Illustration
NOTICE:
Make sure to bend the 2 portions of the cushion rib until the claws of SST can fit securely.
(b) Using SST, remove the rear suspension member rear body mounting cushion, while applying grease to the clearance between the rear
suspension member rear body mounting cushion and the rear suspension member sub-assembly
Text in Illustration
SST : 09950-40011
09951-04020
09952-04010
09953-04030
09954-04020
09955-04061
09957-04010
09958-04011
SST : 09950-60010
09951-00320
NOTICE:
*
Apply grease to the threads and tip of SST center bolt before use.
*
Be careful as the rear suspension member rear body mounting cushion may fly out.