IS 250C V6-2.5L (4GR-FSE) (2011)
Keyless Entry Module: Service and Repair
Removal
DOOR LOCK: DOOR CONTROL RECEIVER: REMOVAL
1. OPEN METAL TOP ROOF See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Roof Headlining (for Front
Side)/Removal
2. REMOVE REAR SEAT CUSHION ASSEMBLY LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY RH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Removal
4. REMOVE PACKAGE TRAY TRIM GARNISH LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Removal
5. REMOVE PACKAGE TRAY TRIM GARNISH RH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly/Removal
6. REMOVE REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY See: Seats/Service and Repair/Removal and
Replacement/Rear Seat Assembly/Removal
7. REMOVE FRONT PACKAGE TRAY TRIM BOARD See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal and
Replacement/Rear Seat Inner Belt Assembly/Removal
8. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the connector.
(b) Remove the bolt.
(c) Disengage the 2 guides and remove the door control receiver.