IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-2135001.png)
Power Seat Switch: Testing and Inspection
Lumbar Switch
SEAT: LUMBAR SWITCH: INSPECTION
1. INSPECT FRONT POWER SEAT LUMBAR SWITCH LH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the lumbar switch LH.
2. INSPECT FRONT POWER SEAT LUMBAR SWITCH RH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the lumbar switch LH.
