IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-2149001.png)
Seat Heater Switch: Testing and Inspection
SEAT: SEAT HEATER SWITCH: INSPECTION
1. INSPECT SEAT HEATER SWITCH
(a) Inspect seat heater switch operation.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the seat heater switch.
(b) Inspect seat heater switch indicator operation.
(1) Apply battery voltage and check operation of the switch, as shown in the table below.
Standard:
If the result is not as specified, replace the seat heater switch.
(c) Inspect seat heater switch illumination.
(1) Apply battery voltage and check operation of the switch, as shown in the table below.
Standard:
