IS 250C V6-2.5L (4GR-FSE) (2011)
(e) Remove the front No. 1 brake line and rear No. 1 brake line from the clamp.
NOTICE:
Do not damage the brake lines or clamp.
Text in Illustration
(f) Remove the 2 bolts and nut, and separate the brake actuator assembly with bracket from the body.
(g) Remove the brake actuator assembly with bracket.
NOTICE:
Do not damage the brake lines.
3. REMOVE BRAKE ACTUATOR ASSEMBLY
(a) Remove the 3 bolts and the brake actuator assembly from brake actuator bracket assembly.
4. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY
(a) Remove the 3 brake actuator bolt collars and 3 brake actuator bolt case cushions from the brake actuator bracket assembly.