IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1278001.png)
Brake Hose/Line: Service Precautions
BRAKE SYSTEM (OTHER): BRAKE LINE: PRECAUTION
NOTICE:
*
Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake
fluid leak is found. If any abnormality is found, replace the component with a new one.
*
When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering
the lines.
*
Do not allow brake fluid to adhere to any painted surface such as the vehicle body. If brake fluid leaks onto any painted surface,
immediately clean it off.
*
When installing a grommet to the body, ensure that the brake line passes through the center of the grommet.
*
Do not damage or deform the brake lines when removing and installing them.
*
When installing a brake line or flexible hose, ensure that they are free from twists or bends.
*
Do not deform the bracket and the body when connecting a brake line and flexible hose.
*
If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.
*
Flexible hoses must be free from shock absorber oil, grease, etc.
*
When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.
*
Do not reuse any clips or plastic clamps removed from a flexible hose.
*
After installing a brake line or flexible hose, ensure that they do not interfere with any other components.
*
When disconnecting and connecting a flexible hose and brake line:
Text in Illustration
(1) Hold the flexible hose with a wrench and disconnect the brake line with a union nut wrench without deforming the line.
(2) Remove the clip.
(3) Install a new clip.
(4) Connect the brake line with a union nut wrench without deforming the line.
*
When connecting a brake line and way:
Text in Illustration
(1) Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.
(2) Support the way to prevent deformation of the brake line and install the bolt to secure the way to the body.
