IS 250C V6-2.5L (4GR-FSE) (2011)
Clutch Switch: Service and Repair
Installation
CRUISE CONTROL: CLUTCH SWITCH: INSTALLATION
1. INSTALL CLUTCH SWITCH ASSEMBLY
(a) Fully loosen the lock nut of the clutch switch assembly.
(b) Adjust the clutch switch until the threaded portion makes gentle contact with the cushion. Tighten the lock nut and verify the contact of the
switch threaded portion with the cushion.
Torque : 16 Nm (160 kgf-cm, 12 ft-lbf)
(c) Connect the connector.
2. INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)
(a) Install the main body ECU (cowl side junction block LH) with the 2 nuts and bolt.
Nut - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
Bolt - Torque : 13 Nm (127 kgf-cm, 9 ft-lbf)
(b) Connect all connectors.
3. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Knee Airbag Assembly (for Driver Side)/Installation
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
6. INSTALL INSTRUMENT SIDE PANEL LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
7. INSTALL FRONT DOOR OPENING TRIM COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Roof Headlining (for Front Side)/Installation
8. INSTALL DOOR SCUFF PLATE ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Installation