IS 250C V6-2.5L (4GR-FSE) (2011)
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
HINT
Make sure the removed parts are returned to the same places they were removed from.
17. INSTALL NO. 2 OIL PIPE See: Service and Repair/Overhaul/Reassembly
18. INSTALL NO. 1 OIL PIPE See: Service and Repair/Overhaul/Reassembly
19. INSTALL SPARK PLUG See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Installation
20. INSTALL IGNITION COIL ASSEMBLY See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair/Installation
21. INSTALL INJECTOR DRIVER See: Service and Repair/Removal and Replacement/Engine Unit/Installation
22. INSTALL NO. 1 ENGINE COVER See: Service and Repair/Removal and Replacement/Engine Unit/Installation
23. INSTALL GENERATOR ASSEMBLY
See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and Replacement/Installation.
24. INSTALL FUEL PUMP ASSEMBLY
See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and Repair/Removal and Replacement/Fuel Pump (for High
Pressure)/Installation.
25. INSTALL BATTERY
See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and Modules - Steering/Steering Control Module/Service and
Repair/Installation.