IS 250C V6-2.5L (4GR-FSE) (2011)
If the operation is not as specified, check the oil control valve, wire harness and ECM.
(3) Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 2).
(4) Check the engine speed when the oil control valve is operated using the Techstream with the engine coolant temperature at 50°C (122°F)
or less.
HINT
*
When performing the Active Test, the air conditioning should be on.
*
Engine coolant temperature when the engine is started should be 30°C (86°F) or less.
Standard Condition:
If the operation is not as specified, check the oil control valve, wire harness and ECM.