IS 250C V6-2.5L (4GR-FSE) (2011)
Oil Level Sensor: Service and Repair
Installation
4GR-FSE LUBRICATION: OIL LEVEL SENSOR: INSTALLATION
1. INSTALL ENGINE OIL LEVEL SENSOR
(a) Install a new gasket to the engine oil level sensor.
(b) Install the engine oil level sensor with the 4 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
HINT
Be sure to clean the contact surface.
(c) Connect the engine oil level sensor connector.
2. ADD ENGINE OIL See: Engine Oil/Service and Repair/Replacement
3. INSPECT FOR ENGINE OIL LEAK
4. CHECK ENGINE OIL LEVEL See: Testing and Inspection
5. INSTALL NO. 2 ENGINE UNDER COVER
6. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY LH See: Service and Repair/Removal and Replacement/Engine
Assembly/Installation
7. INSTALL NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY RH See: Service and Repair/Removal and Replacement/Engine
Assembly/Installation
8. INSTALL FRONT FLOOR COVER LH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation
9. INSTALL FRONT FLOOR COVER RH See: Service and Repair/Removal and Replacement/Engine Assembly/Installation